4GB 1333MHz ECC REG; Patriot Memory's Signature Line ECC Registered memory delivers quality, reliability and performance necessary for today's server needs. These 4GB modules are designed to run at 1333MHz at CAS 9 latency timings. Built using specific build-of-materials (BOMs) you can rest assured that every piece of server memory is of the highest quality. And with free customer service and a lifetime warranty, Patriot Memory's server memory reduces your total cost of ownership.

HP Smartbuy Z210 2GB DDR3-1333 ECC RAM

4GB KIT (2X2GB) PC24200 ECC UNBUFFERED 240 PIN DDR2 KIT

2GB (2X1GB) PC25300 ECC 240 PIN APPLE MAC PRO FULLY BUFFERED KIT

3GB Kit (1GB x 3) 1600MHz 8-8-8-24, 1.65V, DOMINATOR, Unbuffered, 240-pin...The TR3X3G1600C8D is a 3072MByte kit of DDR3 SDRAM DIMMs based upon Corsair's high performance Dominator family of memory which includes Intel's Extreme Memory Profiles (XMP 1.2). This enables a robust, profile based high performance DDR3 over-clocking solution for Intel X58 platforms targeted for enthusiasts, gamers and overclockers who want to extract maximum performance from their platforms. Built using Corsair's Dual-path Heat Xchange (DHX) technology, this part delivers outstanding performance in the latest generation of X58 DDR3-based motherboards. This memory has been verified to operate at 1600MHz at latencies of 8-8-8-24 at 1.65V VDIMM.

disco per crucial 12/22/11 12GB kit (2GBx3) DDR3-1333 UDIMM 240pin - Ballistix Sport

4GB kit (2GBx2), 240-pin DIMM, DDR3 PC3-10600 memory module ...CL=9, Dual Ranked, Registered, ECC, DDR3-1333, 1.5V, 256Meg x 72.

disco per kingston 10/3/11 Fujitsu-Siemens 1GB DDR 333MHz SODIMM

PC3-12800 DDR3 GOLD 1600MHZ DUAL CHANNEL 2GB (2 X 1GB) KIT 8-8-8-26

4GB 1866MHz DDR3 Non-ECC CL11 SODIMM (Kit of 2) HyperX Plug n Play

Hyper X 4GB PC2-8500 1066MHz DDR2 Non-ECC CL5 (5-5-5-15) DIMM (Kit of 2)...Standard 256M X 64 Non-ECC 1066MHz 240-pin Unbuffered DIMMs (SDRAM-DDR2, 2.2V, CL5, Gold). KHX8500D2K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR2-1066 CL5 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR2 FBGA components per module. Total kit capacity is 4GB (4096MB). Each module pair has been tested to run at DDR2-1066MHz at a latency timing of 5-5-5-15 at 2.2V. The SPD is programmed to JEDEC standard latency 800Mhz timing of 5-5-5-15 at 1.8V. This 240-pin DIMM uses gold contact fingers and requires +1.8V.

12GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 3) XMP (consists of three 4GB sticks)

6GB 1333MHz DDR3 ECC CL9 DIMM (Kit of 3) SR X8 w/TS Intel

1GB PC2100 ECC REGISTERED 184 PIN DDR SDRAM DIMM (2 sticks of 512MB)

2GB 667MHz DDR2 ECC Fully Buffered CL5 DIMM Single Rank, x4...Standard 256M X 72 ECC 667MHz 240-pin Fully Buffered DIMM (SDRAM-DDR2, 1.8V, CL5, FBGA, Gold). ValueRAM's 2GB (256M x 72-bit) PC2-5300 CL5 SDRAM (Synchronous DRAM) "fully buffered" ECC "single rank" memory module. This module is based on eighteen 256M x 4-bit 667MHz DDR2 FBGA components. The module also includes an AMB device (Advanced Memory Buffer).

4GB 667MHz DDR2 Low-Latency CL4 (4-4-4-12) SODIMM (Kit of 2)

Hyper X 4GB 800MHz DDR2 Non-ECC Low-Latency CL5 (5-5-5-18) SODIMM (Kit of 2)...Standard 256M X 64 Non-ECC 800MHz 200-pin Unbuffered SODIMM (SDRAM-DDR2, 1.8V, CL5, Gold). Kingston's KHX6400S2LLK2/4G is a kit of two 256M x 64-bit 2GB (2048MB) CL5 SDRAM (Synchronous DRAM) memory modules. Each module is based on sixteen 128M x 8-bit DDR2 FBGA components. Total kit capacity is 4GB (4096MB). The SPDs are programmed to JEDEC low latency timing of 5-5-5-18 at 1.8V. Each 200-pin SODIMM uses gold contact fingers and requires +1.8V.

4GB Kit (2GB x 2) PC3-10666 (1333MHz) DDR3 240-pin SDRAM DIMM, Non-ECC, Unbuffered, 128M x 8, Heat spreader...The TW3X4G1333C9DHX is a 4096MByte matched pair of DDR3 SDRAM DIMMs built using Corsair's latest high performance heat sink with Dual-Path Heat Xchange (DHX) technology. This part delivers outstanding performance in the latest generation of dual-channel DDR3-based motherboards. It has been tested extensively in popular DDR3 motherboards to ensure compatibility and performance at its rated speed. This memory has been verified to operate at 1333MHz at the low latencies of 9-9-9-24. Designed for 64-bit operating systems.

4GB 800MHz DDR2 Non-ECC Low-Latency CL4 (4-4-4-12) DIMM (Kit of 2)

8GB Kit 1600MHz DDR3; The Patriot Viper II 'Sector 5' Series, part of the Extreme Performance (EP) line Low Latency, is the ultimate performance memory solution for the Intel P55 system platform. These modules are engineered to reach PC3-12800 (1600MHz) at 7-9-7-21 timings and are available in 8GB kit capacity (2 x 4GB). Each module is 100% hand-tested for quality assurance.

2GB (2048 MB) DDR2-667 FB Module, 240-pin DIMM, DDR2-PC5300, CL=5, FULLY BUFFERED, ECC, DDR2-667, 1.8V, 256Meg x 72.

1GB PC133 ECC REGISTERED 168 PIN SDRAM

8GB Kit 1600MHz DDR3; The Patriot G series 'Sector 5' edition, part of the Extreme Performance (EP) Enhanced Latency line, is the ultimate performance memory solution for the Intel P55 system platform. These modules are engineered to reach PC3-12800 (1600MHz) at 9-9-9-24 timings and are available in 8GB (2 x 4GB) kit capacity. Each module is 100% hand-tested for quality assurance.

Patriot Memorys Viper Xtreme Division 4 Series memory kits are designed specifically for Intels X79 platform and 2nd generation Core processors. Available in 8GB and 16GB kits, these modules are engineered to run at PC3-15000 (1866MHz) speeds at 9-11-9-27 timings.

8GB DDR3 (2x4GB) PC3-12800-extruded CL8 1600 EX

6GB kit (2GBx3), Ballistix 240-pin DIMM, DDR3 PC3-12800 memory module

1GB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, ECC, 2.6V, 128Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.

Dual Channel 2048MB PC4200 DDR2 533MHz Memory (2 x 1024MB)

PNY - 6GB, DDR3, 1600,CAS8, TRI-CH Memory

2GB kit (1GBx2), DDR3 PC3-10600,Reg, ECC, Single Rank

6GB (3x2GB) PC3-12800-extruded CL8 1600 EX

6GB 1600MHz DDR3 Non-ECC CL8 DIMM (Kit of 3) XMP

2GB, 240-pin DIMM DDR2 PC2-5300, CL=5, Registered, ECC, DDR2-667, 1.8V, 256Meg x 72....A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix and Ballistix Tracer high-performance memory do not come in 72-bit or registered modules.) To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.

2GB, 240-pin DIMM, DDR2 PC2-5300 memory module, CL=5, Single Ranked, Registered, ECC, DDR2-667, 1.8V, 256Meg x 72, Low Profile.

4GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) XMP; Standard 256M X 64 Non-ECC 1600MHz 240-pin Unbuffered DIMM (DDR3, 1.65V, CL9, FBGA, Gold)

4GB 667MHz DDR2 ECC CL5 DIMM (Kit of 2)...Standard 256M X 72 ECC 667MHz 240-pin Unbuffered DIMM (SDRAM-DDR2, 1.8V, CL5). ValueRAM KVR667D2E5K2/4G is a kit of two 256M x 72-bit 2GB (2048MB) DDR2-667 CL5 SDRAM (Synchronous DRAM) ECC memory modules. Total kit capacity is 4GB (4096MB). The components on each module include eighteen 128M x 8-bit DDR2-667 SDRAM in FBGA packages. Each 240-pin DIMM uses gold contact fingers and requires +1.8V.

2GB PC23200 ECC REGISTERED 240 PIN DDR2 DIMM

2GB ECC REGISTERED 240 PIN DDR2 DIMM

4GB Kit 800MHz DDR2; The Patriot Gamer Series, part of the Extreme Performance (EP) Enhanced Latency line, is engineered to expand your gaming options. These modules are engineered to reach PC2-6400 (800MHz) at 5-5-5-12 timings and are available in 4GB kit (2 x 2GB) capacity. Each module is 100% hand-tested for quality assurance.

2GB, 240-pin DIMM, DDR3 PC3-8500 memory module, CL=7, Single Ranked, Registered, ECC, DDR3-1066, 1.5V, 256Meg x 72.

2GB Kit (1GB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 128Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.

8GB kit (4x2GB) DDR3 1333MHz Unbuffered CL 9 DIMM Memory for AMD Phenom II DDR3 platforms; Corsair's mainstream memory solution for the AMD Phenom II processors and platform. The XMS3 family is Corsair's mainstream line of performance DDR3 memory. These modules allow users to experience outstanding memory performance and stability. Available in Corsair's XMS heat spreaders, each module is built using carefully selected RAMs.

8GB DDR3 (2x4GB) PC3-10600-clamp CL9 1333 LP

12GB kit (4GBx3), 240-pin DIMM, DDR3 PC3-10600 memory module ... CL=9, Unbuffered, Non-ECC, DDR3-1333, 1.5V, 512Meg x 64.

4GB KIT (2GB X 2) PC2-5300 DDR2-667 CL5 ECC 240-pin DIMM

2GB DDR2 667HZ DIMM

4GB Kit (2x2GB)DDR2, XMS2-6400 2x256Mx64non-ECC 2x240 DIMM, unbuffered, 5-5-5-18, 128Mx8 DRAMs, matched XMS2 Heat Spreader

8GB (2X4G) NB3-12800 CL9 1600 SO Retail PC3-12800 SODIMM 1600 CL9 (4GB x 2 modules)

1GB PC3200 ECC UNBUFFERED 184 PIN DDR400 SDRAM DIMM

Vengeance Performance Memory Module 8GB (2x4GB) DDR3 1600MHz CL9 Unbuffered DIMM Memory for AMD, Intel Dual Channel DDR3, and upcoming 2nd Generation Intel Core platforms.Key Features 1.5V8GB (2x4GB) DDR3 for AMD, Intel Dual processors and upcoming 2nd Generation Intel Core platforms 1600MHz 9-9-9-24 latency Vengeance heat spreader for styling and performance Intel XMP (Extreme Memory Profile) Support Limited Lifetime Warranty