|
PNY 512MB PC100/133 DIMM MEMORY
|
751492319674
|
$34.99
|
|
2GB 1066MHz DDR2 Non-ECC CL5 (5-5-5-15) DIMM
|
740617130973
|
$34.99
|
|
2GB, 240-pin DIMM, DDR2 PC2-850
|
649528739803
|
$37.99
|
|
1GB Kit (512MB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 64Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
|
649528729286
|
$34.99
|
|
4GB KIT, DD3, DIMM 1333 Memory Module
|
751492419183
|
$34.99
|
|
1GB Value Select series PC-3200 (400MHz) SODIMM, 3-3-3-8, 200-pin...Designed for current generation notebooks and mini-PCs, Corsair's high density SODIMMs allow users to maximize memory bandwidth and minimize performance bottleneck to deliver superior user experience. The Corsair ValueSelect SODIMMs are optimized for the Microsoft Windows Vista client operating system; Individually tested; Superior hardware design to reduce heat generation.
|
870584003793
|
$30.99
|
|
1 GB (1024 MB) DDR-400 Memory Module, DDR PC3200, CL=3, UNBUFFERRED, NON-ECC, DDR400, 2.5V, 128Meg x 64, 200-pin SODIMM.
|
649528722621
|
$33.99
|
|
4GB kit (2GBx2), 240-pin DIMM, DDR3 PC3-8500 memory module ... CL=7, Unbuffered, ECC, DDR3-1066, 1.5V, 256Meg x 72.
|
649528741363
|
$39.99
|
|
4GB kit (2GBx2), 240-pin DIMM, DDR3 PC3-10600 memory module
|
649528743107
|
$39.99
|
|
4GB, 240-pin DIMM, DDR3 PC3-8500 memory module ... CL=7, Unbuffered, ECC, DDR3-1066, 1.5V, 512Meg x 72.
|
649528746399
|
$33.99
|
|
4GB, 240-pin DIMM, DDR3 PC3-10600 memory module
|
649528748683
|
$33.99
|
|
1GB PC2700 ECC REGISTERED 184 PIN DDR333 DIMM
|
652977197322
|
$32.99
|
|
disco per patriot 11/1/11. 4GB (2x2GB) 1600MHz DDR3; Patriot?s Viper Xtreme Series, Division 2 Edition memory kits are designed for Intel?s 2nd Generation Core processors. These modules are engineered to reach PC3-12800 (1600MHz) at 8-9-8-24 timings and are available in 4GB kits (2 x 2GB) and 8GB kits (2 x 4GB). Each module is 100% hand-tested and backed by a full-lifetime warranty and industry leading customer service.
|
815530011019
|
$34.99
|
|
2GB, 240-pin DIMM, DDR3 PC3-10600 ECC, Reg Dual Ranked
|
649528743305
|
$26.99
|
|
2GB, 240-pin DIMM, DDR3 PC3-10600 memory module ... CL=9, Single Ranked, Registered, ECC, DDR3-1333, 1.5V, 256Meg x 72.
|
649528744791
|
$28.99
|
|
6GB kit (2GBx3), 240-pin DIMM, DDR3 PC3-8500 memory module ... CL=7, Unbuffered, Non-ECC, DDR3-1066, 1.5V, 256Meg x 64.
|
649528744371
|
$39.99
|
|
6GB kit (2GBx3), 240-pin DIMM, DDR3 PC3-10600 memory module ... CL=9, Unbuffered, Non-ECC, DDR3-1333, 1.5V, 256Meg x 64.
|
649528744388
|
$39.99
|
|
2GB DDR2 40nm SODIMM
|
036725650107
|
$33.99
|
|
2GB DDR2 40nm UDIMM
|
036725650084
|
$33.99
|
|
4GB PC3-8500 1066MHz DDR3 SODIMM Low-Halogen Memory // for T500 2242 Series
|
884942104039
|
$33.99
|
|
4GB PC3-10600 DDR3-1333 Low-Halogen SODIMM Memory
|
884942775765
|
$38.99
|
|
2GB 800MHz DDR2 Non-ECC CL5 (5-5-5-15) DIMM
|
740617114201
|
$34.99
|
|
4GB (2X2G) NB3-12800 CL9 1600 SO Retail PC3-12800 SODIMM 1600 CL9 (2GB x 2 modules)
|
784090026996
|
$33.99
|
|
1GB 184-pin DDR SDRAM DIMM Module, 2.5V, 128Mx64, 266MHz (PC-2100), CL 2.5...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as 128Mx64 array using (16) 64Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise.
|
761133900628
|
$24.99
|
|
1GB 184-pin DDR SDRAM DIMM Module, 2.5V, 128Mx64, 333MHz (PC-2700), CL 2.5...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as 128Mx64 array using (8) 128Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise.
|
761133900673
|
$24.99
|
|
1GB 184-pin DDR SDRAM DIMM Module, 2.5V, 128Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as 128Mx64 array using (16) 64Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise.
|
761133900710
|
$24.99
|
|
1GB 200-pin DDR SDRAM SO-DIMM Memory Module, 333MHz (PC2700), 2.5V, 128MX64, CL 2.5 ...This module is JEDEC-standard 200-pin, small-outline, dual in-line memory module. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as a 128MX64 array using (16) 64MX8 (4 internal banks) SDRAMs in BGA packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise.
|
761133901052
|
$25.99
|
|
1GB 200-pin DDR SDRAM SO-DIMM Memory Module, 400MHz (PC3200), 2.5V, 128MX64, CL 3 ...This module is JEDEC-standard 200-pin, small-outline, dual in-line memory module. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as a 128MX64 array using (16) 64MX8 (4 internal banks) SDRAMs in BGA packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise.
|
761133901069
|
$25.99
|
|
1GB DDR 400(PC3200) UDIMM TAA COMP 184pin
|
649528747006
|
$34.99
|
|
2GB PC2-5300 ECC 240 PIN DDR2 DIMM
|
652977209858
|
$33.99
|
|
4GB Kit 1600MHz DDR3; The Patriot G Series 'Sector 5' edition is engineered to expand your gaming options for the Intel P55 platform. Equipped with lightweight aluminum heat-dispersing shields these modules are engineered to run at PC3-12800 (1600MHz) with 9-9-9-24 timings, available in 4GB kit (2 x 2GB) and comes with a lifetime warranty.
|
879699009164
|
$38.99
|
|
2GB 667MHz DDR2 ECC CL5 DIMM (Kit of 2)...Standard 128M X 72 ECC 667MHz 240-pin Unbuffered DIMM (SDRAM-DDR2, 1.8V, CL5). ValueRAM KVR667D2E5/2G is a kit of two 128M x 72-bit 1GB (1024MB) DDR2-667 CL5 SDRAM (Synchronous DRAM) ECC memory modules. Total kit capacity is 2GB (2048MB). The components on each module include eighteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-667 SDRAM in FBGA packages. Each 240-pin DIMM uses gold contact fingers and requires +1.8V.
|
740617083460
|
$36.99
|
|
4GB DDR3 PC3-12800-extruded CL8 1600 EX
|
784090029256
|
$32.99
|
|
6GB 1066MHz DDR3 Non-ECC CL7 Single Rank DIMM (Kit of 3)
|
740617193817
|
$38.99
|
|
512MB (1X512MB) PC23200 144 PIN DDR2 SODIMM
|
652977227227
|
$38.99
|
|
1GB PC26400 ECC 240 PIN FULLY BUFFERED DIMM
|
652977215996
|
$31.39
|
|
4GB DDR3 PC3-10600-clamp CL9 1333 LP
|
784090029195
|
$29.99
|
|
2GB 533MHz DDR2 Non-ECC Low-Latency CL3 SODIMM
|
740617152494
|
$33.99
|
|
4GB Kit 1333MHz DDR3; The Patriot G Series ?Sector 5? edition is engineered to expand your gaming options for the Intel P55 platform. Equipped with lightweight aluminum heat-dispersing shields these modules are engineered to run at PC3-10666 (1333MHz) with 9-9-9-24 timings, available in 4GB kit (2 x 2GB) and comes with a lifetime warranty.
|
879699009140
|
$35.99
|
|
4GB Notebook DDR3 Kit PC 10666
|
751492423678
|
$31.99
|
|
1GB PC2700 NONECC UNBUFFERED 200 PIN DDR333 SDRAM SODIMM
|
652977195571
|
$28.99
|
|
1GB PC2700 Non-ECC DDR333 SoDIMM
|
297719943203
|
$28.99
|
|
1GB DDR PC2700 200PIN SODIMM
|
649528721174
|
$30.99
|
|
DDR3, 1333MHz 4GB 2x240 DIMM, Unbuffered, 9-9-9-24, Matched XMS3 with New Classic Heat Spreader - his DDR3 4GB twin kit solution runs at 1333MHz at CAS latency of 9-9-9-24 and utilizes the new Classic XMS heat spreaders. These modules are guaranteed to support all Dual Channel DDR3 platforms from Intel and AMD.
|
843591005142
|
$31.99
|
|
4GB (2X2G) NB3-10600 CL9 1333 SO Retail PC3-10600 SODIMM 1333 CL9 (2GB x 2 modules)
|
784090026972
|
$30.99
|
|
1GB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 128Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
|
649528720726
|
$28.99
|
|
Vengeance Performance Memory Module 4GB (2x2GB) DDR3 1600MHz CL9 Unbuffered DIMM Memory for AMD, Intel Dual Channel DDR3, and 2nd Generation Intel Core? platforms.
|
843591010818
|
$34.99
|
|
2GB Kit (1GB x 2) XMS2-6400 (800MHz Xtreme Performance Memory) DDR2 240-pin DIMM, Non-ECC, Unbuffered, Latency 5-5-5-18 at 1.9V, 64Mx8, matched pair...This is a 2GByte kit, two-rank DDR2 SDRAM DIMM designed for extreme speed. This part delivers outstanding performance in the latest generation of DDR2-based motherboards. It has been tested extensively in multiple DDR2 motherboards to ensure compatibility and performance at its rated speed. This memory has been verified to operate at 800MHz at the low latencies of 5-5-5-18.
|
870584005704
|
$37.99
|
|
PNY DDR2 Desktop Memory Module. Quantity 1. DRAM DIMM 240-pin
|
751492312361
|
$30.99
|
|
4GB 1333MHz DDR3 Non-ECC CL9 DIMM (Kit of 2)...Standard 256M X 64 Non-ECC 1333MHz 240-pin Unbuffered DIMM (SDRAM-DDR3, 1.5V, CL9, FBGA, Gold). ValueRAM's KVR1333D3N9K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3-1333 FBGA components per module. Total kit capacity is 4GB (4096MB). The SPDs are programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.
|
740617134308
|
$31.99
|
