The Tripp Lite B126-1A1 active extender kit is the perfect solution for those who need to extend a HDMI signal over a long distance with a single Cat5e/6 patch cable. In addition to connecting a remote display, the local unit also provides a HDMI output for connecting to a local monitor. When using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series), the B126-1A1 can extend a 1080i (60Hz) signal up to 200 ft.; or, a 1080p (60Hz) signal up to 150 ft.. The remote unit comes with a built-in Equalization setting, which allows for adjustment of the video image. No need to make separate purchases; the B126-1A1 kit comes with both local and remote units. Both stereo audio and 7.1 channel surround sound are supported, as well as HDCP protected content. Mounting hardware is included for both the local and remote units, allowing them to be rackmounted, wallmounted or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Two piece kit includes both local and remote units Extends a 1080i (60Hz) signal up to 200 ft.; or, a 1080p (60Hz) signal up to 150 ft. when using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series) Remote unit features a built-in Equalization setting, allowing for adjustment of the video image HDCP compatible Compatible with both stereo audio and 7.1 channel surround sound audio Mounting hardware included for both the local and remote units, allowing them to be rackmounted, wallmounted or pole mounted Local unit includes a HDMI output for connecting a local monitor No software or drivers required Compatible with all operating systems Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-1A1 local unit B126-1A1 remote unit Screwdriver for adjustment of Equalization (x2) Mounting hardware (x2) External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owner's manual
Tripp Lite?s B130-111 extender/repeater kit comes with both local transmitter and remote/repeater units. By connecting an additional remote receiver (B132-100-1 or B132-100-WP-1) or remote/repeater (B132-110) unit, you can locate multiple monitors at different points in a chain of up to 2,000 ft.. With Tripp Lite?s standard transmitters and receivers, a single VGA monitor can be located up to 1,000 ft. from the source. By inserting a remote/repeater unit in between, the signal can be regenerated and extended to another monitor up to an additional 1,000 ft. away. A monitor can be connected to both the remote/repeater and the receiver, allowing the signal to be transmitted to both points in the chain. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays located at different points in the installation. Equalization and Gain controls are built into the remote/repeater unit for the adjustment of the video image. Mounting hardware is included for both the local and remote units, allowing them to be wall mounted, rackmounted, or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Kit comes with both local transmitter and remote/repeater units. Locate multiple monitors at different points in a chain of up to 2,000 ft. by connecting an additional remote receiver (B132-100-1 or B132-100-WP-1) or remote/repeater (B132-110) unit. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays in a full chain. Extend a 1024 x 768 (60Hz) signal up to 1,000 ft. between the local transmitter and the first remote/repeater in the installation. Extend a 1024 x 768 (60Hz) signal up to an additional 1,000 ft. from the first remote/repeater unit to the last display in the installation, for a maximum extension distance of 2,000 ft.. Features built-in Equalization and Gain controls for video image adjustment. Includes mounting hardware that allows wall mounting, rackmounting or pole mounting. 1 year limited warranty. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Typical Applications Locate multiple monitors at different points in a chain of up to 2,000 ft. by connecting additional remote receiver (B132-100-1 or B132-100-WP-1) or remote/repeater (B132-110) units to the remote/repeater included with the B130-111 kit. System Requirements Computer with VGA video output Monitor / TV with VGA video input Package Includes B130-111 local transmitter unit B130-111 remote/repeater unit (x2) 5V, 2A external power supply Screwdriver for video adjustment Mounting hardware Owner's manual
Tripp Lite's B126-004 splits a HDMI signal into 5 (1 Local, 4 Remote), and allows you to locate monitors over long distances using a single Cat5e/6 cable. Connect up to 13 monitors (1 Local, 12 Remote) by daisychaining up to three units together. When used with an active remote unit (B126-1A0 or B126-1A0-WP), a 1080i (60Hz) signal can be extended up to 200 ft.; or, a 1080p (60Hz) signal can be extended up to 150 ft.. When used with a passive remote unit (B126-1P0 or B126-1P0-WP), a 1080i (60Hz) signal can be extended up to 100 ft.; or, a 1080p (60Hz) signal can be extended up to 50 ft.. 24Awg, Solid wire Cat5e/6 cable (Tripp Lite N202-Series) is required to reach max distance and resolution. Supports both stereo audio and 7.1 channel surround sound audio, as well as HDCP protected content. Mounting hardware is included that allows the B126-004 to be rackmounted, wallmounted or pole mounted. Also, up to three units can be mounted in 1U of rack space using a Tripp Lite B132-004-RB Extender/Splitter 19in rackmount bracket. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Splits a single HDMI signal into 5 (1 Local, 4 Remote) Connect up to 13 monitors (1 Local, 12 Remote) by daisychaining up to three units together When used with an active remote unit (B126-1A0 or B126-1A0-WP), a 1080i (60Hz) signal can be extended up to 200 ft.; or, a 1080p (60Hz) signal can be extended up to 150 ft. When used with a passive remote unit (B126-1P0 or B126-1P0-WP), a 1080i (60Hz) signal can be extended up to 100 ft.; or, a 1080p (60Hz) signal can be extended up to 50 ft. 24Awg, Solid wire Cat5e/6 cable (Tripp Lite N202-Series) is required to reach max distance and resolution HDCP compatible Compatible with both stereo audio and 7.1 channel surround sound audio Mounting hardware is included that allows the B126-004 to be rackmounted, wallmounted or pole mounted Up to three B126-004 local units can be mounted in 1U of rack space using a Tripp Lite B132-004-RB Extender/Splitter 19in rackmount bracket Compatible with all operating systems Plug and play; No drivers required Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-004 HDMI Over Cat5 Extender/Splitter, 4-Port 1 ft. HDMI daisychain cable Mounting hardware External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owner Manual
The B126-1P0 is a passive extender remote unit for the B126-002 (2-Port) and B126-004 (4-Port) HDMI Over Cat5 Extender/Splitter local units. When using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series), a HDMI signal can be extended up to 100 ft. at 1080i (60Hz); or, up to 50 ft. at 1080p (60Hz). The built-in HDMI male connector plugs directly into a monitor without the need for an additional cable. When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Passive extender remote unit for the B126-002 (2-Port) and B126-004 (4-Port) Extender/Splitter local units Extends a HDMI signal up to 100 ft. at 1080i (60Hz); or, up to 50 ft. at 1080p (60Hz) when using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series) Built-in HDMI male connector plugs directly into a monitor without the need for an additional cable When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content Compatible with all operating systems Plug and play; No drivers or external power required Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-1P0 HDMI Over Cat5 Passive Extender Remote Unit Owner's manual
The B126-1P0-WP is a passive extender remote wallplate for the B126-002 (2-Port) and B126-004 (4-Port) HDMI Over Cat5 Extender/Splitter local units. When using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N022-01K-GY, N202-Series or N222-01K-GY), a HDMI signal can be extended up to 100 ft. at 1080i (60Hz); or, up to 50 ft. at 1080p (60Hz). When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Passive extender remote wallplate for the B126-002 (2-Port) and B126-004 (4-Port) Extender/Splitter local units Extends a HDMI signal up to 100 ft. at 1080i (60Hz); or, up to 50 ft. at 1080p (60Hz) when using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N022-01K-GY, N202-Series or N222-01K-GY) When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content Compatible with all operating systems Plug and play; No drivers or external power required Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-1P0-WP HDMI Over Cat5 Passive Extender Remote Wallplate Wallplate mounting hardware 110 punchdown tool Owner's manual
COMPRESSION BNC-TYPE CONNECTOR for RG59 - 50PK. Compression type connectors are a breeze to install. These are more reliable and easier to use than traditional hex crimp BNC connectors. Simply prepare the cable in the same manner as an F-type connector, insert the connector onto the coax cable and compress it with the 3-in-1 compression tool (item #38011). The connector center pin features inside barbs that ensure a positive connection to the cable's center conductor. Quickly make custom length video cables for home theater, broadcast video and surveillance applications.
Get quick and easy diagnosis of open wires, shorted wires, crossed wires, and miswiring - now for almost any PC cable on the market (Serial ATA, RJ45, USB,IEEE-1394 FireWire, DB9, DB25, HD15)! FD only
Tripp Lite's B132-002-1 allows you to split a single VGA signal into 2. When used with a B132-100-1 or B132-100-WP-1 remote unit, you can extend a 1024 x 768 (60Hz) signal up to 1,000 ft. from the source using 24Awg, Solid Wire Cat5e/6 cable. For optimal video image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K. A maximum resolution of 1920 x 1440 (60Hz) is supported. Includes mounting hardware that allows unit to be wallmounted, rackmounted or pole mounted. Ideal for digital signage situations, such as retail, schools, churches, etc. 1 year limited warranty. Key Features Splits a single VGA signal into 2 Supports a maximum resolution of 1920 x 1440 (60Hz) Extends a 1024 x 768 (60Hz) signal up to 1,000 ft. when using 24Awg, Solid Wire Cat5e/6 cable For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K Includes mounting hardwarethat allows unit to be wallmounted, rackmounted or pole mounted. Ideal for digital signage situations, such as retail, shools, churches, etc. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes 2 Port Extender/Splitter local (Transmitter) unit Mounting hardware External Power Supply (Input: 100-240V, 50/60Hz, 1.5A Output: 12.6V, 3A) Owner's Manual
Tripp Lite's B132-110 remote/repeater unit both extends and expands your VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft.. With Tripp Lite's standard transmitter and receiver units, a single VGA monitor can be located up to 1,000 ft. from the source. By inserting the B132-110 remote/repeater unit in between, the signal can be regenerated and extended to another monitor up to an additional 1,000 ft. away. A monitor can be connected to both the remote/repeater and the receiver, allowing the signal to be transmitted to both points in the chain. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays located at different points in the installation. With Tripp Lite's wide assortment of VGA over Cat5 extender solutions, the B132-110 remote/repeater unit can be used in a variety of ways to create the installation best suited to your needs. Insert the B132-110 in between the local transmitter and remote receiver units of your B130-101 extender kit Connect the B132-110 to the remote/repeater unit that comes with the B130-111 extender/repeater kit Connect the B132-110 to an available port on a B132-002-1 or B132-004-1 extender/splitter Unit features Equalization and Gain controls to adjust the video image. Includes mounting hardware that allows unit to be wall mounted, rackmounted, or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft.. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays in a full chain. Extend a 1024 x 768 (60Hz) signal up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation Extend a 1024 x 768 (60Hz) signal up to an additional 1,000 ft. from the first remote/repeater unit to the last display in the installation, for a maximum extension distance of 2,000 ft. Features built-in Equalization and Gain controls for video image adjustment Includes mounting hardware that allows wall mounting, rack mounting, or pole mounting 1 year limited warranty Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Typical Applications Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft.. System Requirements Computer with VGA video output Monitor / TV with VGA video input A B132-002-1 or B132-004-1 extender/splitter local unit, or a B130-101 or B130-111 extender kit Package Includes B132-110 remote/repeater unit 5V, 2A external power supply Screwdriver for video adjustment Mounting hardware Owner's manual
Tripp Lite's B126-002 splits a HDMI signal into 2, and allows you to locate monitors over long distances using a single Cat5e/6 cable. When used with an active remote unit (B126-1A0 or B126-1A0-WP), a 1080i (60Hz) signal can be extended up to 200 ft.; or, a 1080p (60Hz) signal can be extended up to 150 ft.. When used with a passive remote unit (B126-1P0 or B126-1P0-WP), a 1080i (60Hz) signal can be extended up to 100 ft.; or, a 1080p (60Hz) signal can be extended up to 50 ft.. 24Awg, Solid wire Cat5e/6 cable (Tripp Lite N202-Series) is required to reach max distance and resolution. Supports both stereo audio and 7.1 channel surround sound audio, as well as HDCP protected content. Mounting hardware is included that allows the B126-002 to be rackmounted, wallmounted or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Splits a single HDMI signal into 2 When used with an active remote unit (B126-1A0 or B126-1A0-WP), a 1080i (60Hz) signal can be extended up to 200 ft.; or, a 1080p (60Hz) signal can be extended up to 150 ft. When used with a passive remote unit (B126-1P0 or B126-1P0-WP), a 1080i (60Hz) signal can be extended up to 100 ft.; or, a 1080p (60Hz) signal can be extended up to 50 ft. 24Awg, Solid wire Cat5e/6 cable (Tripp Lite N202-Series) is required to reach max distance and resolution HDCP compatible Compatible with both stereo audio and 7.1 channel surround sound audio Mounting hardware is included that allows the B126-002 to be rackmounted, wallmounted or pole mounted Compatible with all operating systems Plug and play; No drivers required Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-002 HDMI Over Cat5 Extender/Splitter, 2-Port Mounting hardware External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owner's Manual
The B126-1A0 is an active extender remote unit for the B126-002 (2-Port) and B126-004 (4-Port) HDMI Over Cat5 Extender/Splitter local units. When using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series), the B126-1A0 can extend a 1080i (60Hz) signal up to 200 ft.; or, a 1080p (60Hz) signal up to 150 ft.. An Equalization setting is built-in to the unit, allowing for adjustment of the video image. When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content. Mounting hardware is included, allowing the unit to be rackmounted, wallmounted or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Active extender remote unit for the B126-002 (2-Port) and B126-004 (4-Port) Extender/Splitter local units Extends a 1080i (60Hz) signal up to 200 ft.; or, a 1080p (60Hz) signal up to 150 ft. when using 24Awg, Solid Wire Cat5e/6 cable (Tripp Lite N202-Series) Features a built-in Equalization setting, allowing for adjustment of the video image When used with a B126-002 or B126-004, both stereo audio and 7.1 channel surround sound audio are supported, as well as HDCP protected content Mounting hardware is included, allowing the unit to be rackmounted, wallmounted or pole mounted No software or drivers required Compatible with all operating systems Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases 1 year limited warranty Package Includes B126-1A0 HDMI Over Cat5 Active Extender Remote Unit Screwdriver for adjustment of Equalization Mounting hardware External power supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A) Owner's manual
Cables have a tendency to look cluttered, and the more complicated your setup -- in home theaters, home offices, project studios, and more -- the messier they seem. Monster Cable It provides an amazingly simple way to tidy up any cable mess, whether your setting up a new HDTV or setting up on stage for a gig. Available in three sizes for both small jobs and big projects, with as many as 12 cables and cords, Cable It can make all your spaces cleaner and more organized.
Two piece screw-on design for easy and reliable crimpless and self crimping termination. 24k gold plated contacts for maximum signal transfer and corrosion resistance. Wider base minimizes shorting for maximum signal transfer. Special teeth and ring-lock for strong grip that stays tight for optimum signal transfer. High purity copper braid for greatest flexibility for hard-to-reach binding posts or push pin terminals.
Cables have a tendency to look cluttered, and the more complicated your setup -- in home theaters, home offices, project studios, and more -- the messier they seem. Monster Cable It provides an amazingly simple way to tidy up any cable mess, whether your setting up a new HDTV or setting up on stage for a gig. Available in three sizes for both small jobs and big projects, with as many as 12 cables and cords, Cable It can make all your spaces cleaner and more organized.
Tripp Lite?s B132-110A remote/repeater unit both extends and expands your VGA + Audio over Cat5 installation, allowing you to locate multiple monitors/speakers at different points in a chain of up to 2,000 ft.. With Tripp Lite?s standard transmitter and receiver units, a single set of monitor and speakers can be located up to 1,000 ft. from the source. By inserting the B132-110A remote/repeater unit in between, the signal can be regenerated and extended to another set of monitor and speakers up to an additional 1,000 ft. away. A set of monitor and speakers can be connected to both the remote/repeater and the receiver, allowing the signal to be transmitted to both points in the chain. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/speakers located at different points in the installation. With Tripp Lite?s wide assortment of VGA + Audio over Cat5 extender solutions, the B132-110A remote/repeater unit can be used in a variety of ways to create the installation best suited to your needs. Insert the B132-110A in between the local transmitter and remote receiver units of your B130-101A or B130-101A-WP-1 extender kit Connect the B132-110A to the remote/repeater unit that comes with the B130-111A extender/repeater kit Connect the B132-110A to an available port on a B132-002A or B132-004A extender/splitter Unit features Equalization and Gain controls to adjust the video image. Includes mounting hardware that allows the unit to be wall mounted, rackmounted, or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Both extends and expands your Tripp Lite VGA + Audio over Cat5 installation, allowing you to locate multiple monitors/speakers at different points in a chain of up to 2,000 ft.. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/speakers in a full chain. Extend a 1024 x 768 (60Hz) video and stereo audio signal up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation. Extend a 1024 x 768 (60Hz) video and stereo audio signal up to an additional 1,000 ft. from the first remote/repeater unit to the last set of display and speakers in the installation, for a maximum extension distance of 2,000 ft.. Features built-in Equalization and Gain controls for video image adjustment. Includes mounting hardware that allows wall mounting, rackmounting or pole mounting. 1 year limited warranty. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Typical Applications Both extends and expands your Tripp Lite VGA + Audio over Cat5 installation, allowing you to locate multiple monitors/speakers at different points in a chain of up to 2,000 ft.. System Requirements Computer with VGA video and 3.5mm stereo audio outputs Monitor / TV / Speakers with VGA video and 3.5mm stereo audio inputs A B132-002A or B132-004A extender/splitter local unit, or a B130-101A, B130-101A-WP-1 or B130-111A extender kit Package Includes B132-110A remote/repeater unit 5V, 2A external power supply Screwdriver for video adjustment Mounting hardware Owner's manual
Extends video transmission from a DVI source to a DVI display over an economical CAT5e/6 cable Built-in EDID feature support on the receiver Adjustable 8-level EQ control to maximize video quality Supports 1080i & 1080p HDTV resolutions & VESA standards
Tripp Lite?s B130-111A extender/repeater kit comes with both local transmitter and remote/repeater units. By connecting an additional remote receiver (B132-100A or B132-100A-WP-1) or remote/repeater (B132-110A) unit, you can locate multiple/speakers at different points in a chain of up to 2,000 ft.. With Tripp Lite?s standard transmitter and receivers, a single set of monitor and speakers can be located up to 1,000 ft. from the source. By inserting a remote/repeater unit in between, the signal can be regenerated and extended to another set of monitor and speakers up to an additional 1,000 ft. away. A set of monitor and speakers can be connected to both the remote/repeater and the receiver, allowing the signal to be transmitted to both points in the chain. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/speakers located at different points in the installation. Equalization and Gain controls are built into the remote/repeater unit for the adjustment of the video image. Mounting hardware is included for both the local and remote units, allowing them to be wall mounted, rackmounted, or pole mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1 year limited warranty. Key Features Kit comes with both local transmitter and remote/repeater units. Locate multiple monitors/speakers at different points in a chain of up to 2,000 ft. by connecting an additional remote receiver (B132-100-1 or B132-100-WP-1) or remote/repeater (B132-110A) unit. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/speakers in a full chain. Extend a 1024 x 768 (60Hz) video and stereo audio signal up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation. Extend a 1024 x 768 (60Hz) video and stereo audio signal up to an additional 1,000 ft. from the first remote/repeater unit to the last set of display and speakers in the installation, for a maximum extension distance of 2,000 ft.. Features built-in Equalization and Gain controls for video image adjustment. Includes mounting hardware that allows wall mounting, rackmounting or pole mounting. 1 year limited warranty. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Typical Applications Locate multiple monitors/speakers at different points in a chain of up to 2,000 ft. by connecting additional remote receiver (B132-100A or B132-100A-WP-1) or remote/repeater (B132-110A) units to the remote/repeater included with the B130-111A kit. System Requirements Computer with VGA video and 3.5mm Stereo Audio outputs Monitor / TV / Speakers with VGA and 3.5mm Stereo Audio inputs Package Includes B130-111A local transmitter unit B130-111A remote/repeater unit (x2) 5V, 2A external power supply Screwdriver for video adjustment Mounting hardware Owner's manual
Vertical Cable Manager for NetShelter SX 750mm Wide The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner. Includes: Mounting Hardware, Qty 6
This 6ft Cisco Console Management Cable is designed as a replacement cable for use with several Cisco routers, including the 600, 800, 1600 and 1700 series.StarTech.com's Cisco Console Management cable is Equivalent to Cisco Part No. AIR-CONCAB1200 Console Cable for 1130AG, 1200, 1230AG, 1240 Platforms.
Cables have a tendency to look cluttered, and the more complicated your setup -- in home theaters, home offices, project studios, and more -- the messier they seem. Monster Cable It provides an amazingly simple way to tidy up any cable mess, whether your setting up a new HDTV or setting up on stage for a gig. Available in three sizes for both small jobs and big projects, with as many as 12 cables and cords, Cable It can make all your spaces cleaner and more organized.
Single Gang HD-15, 3.5mm Wall Plate -ALUMINIUM. Add the finishing touch to installations with decorative feed-through wall plates. Designed to mount in standard electrical boxes or mud rings, these wall plates are constructed from 3mm aircraft-grade brushed aluminum to withstand demanding commercial environments. Feed-through connectors and engraved identification markings make these wall plates simple to install and easy to use. Compatible with new or existing wiring networks, this single gang design offers connectors for HD-15 and 3.5mm in one wall plate. The feed-through connectors are designed to offer low-loss signal transfer and maximum insertions for a lifetime of service.
Cables have a tendency to look cluttered, and the more complicated your setup -- in home theaters, home offices, project studios, and more -- the messier they seem. Monster Cable It provides an amazingly simple way to tidy up any cable mess, whether your setting up a new HDTV or setting up on stage for a gig. Available in three sizes for both small jobs and big projects, with as many as 12 cables and cords, Cable It can make all your spaces cleaner and more organized.
